Shop
Showing 91–99 of 176 resultsSorted by latest
-
ContainmentGU17P Drum Hood
P/N: GU17P
This capture velocity drum hood offers a pre-engineered control for personnel and environmental safety and protection. This mobile capture velocity drum hood facilitates the opening and inspection of 55 gallon drums. The hood incorporates a clear viewing section that extends completely over the drum top, or may be retracted to about 1/2 of the drum top diameter, to facilitate access to drum bungs or inspection of drum contents. Air flow from a separate HEPA filtration unit (SP-700 for example) is drawn into the hood, over the drum top at a capture velocity of about 100-170 FPM.
-
ContainmentC101836 Drum Hood
P/N: C101836
Drum adapters and adjustable height allow one hood to accommodate 55, 85 & 110 gallon standard drum sizes. This hood features fast height adjustment with a hand crank, an exhaust prefilter installed in the hood, an 8” flex duct connection that requires a minimum 700 cfm exhaust air flow, and a telescopic clear hood extension to allow access to contents.
-
Frisking BoothsStandard Booth
The Standard Frisking Booth is constructed of 1/4″ – 3″ thick lead sheet panels encased in epoxy painted carbon steel. Cable penetrations are fitted with caps to prevent streaming. The booth can be shipped as an assembled unit, or disassembled for assembly on-site.
-
Frisking BoothsShielded Booth
The Shielded Frisking Booth is a welded one piece construction. It is also available in lead (1/4″- 2″ thick) encased carbon steel painted with epoxy. The panels are cap screwed into the deck as well as bolted together, and the ramps move up and down. The roof is optional. The booth is movable by both forklift and crane, and comes pre-assembled or on pallets for assembly on-site.
-
Frisking BoothsPCM Shielded Booth
The PCM Shielded Frisking Booth is a welded one piece, epoxy coated, carbon steel construction with internal shield walls on either side of the entrance that pivot to allow for maintenance. The booth is primed and painted and has a 3′ wide x 3’ 6” x 7’ high shielded area with a shielding thicknesses of ½ to 3” steel. It features a 304 stainless steel shelf for a portable monitor and service ports as required (not pictured). The booth has a 115vac receptacle and a single point electrical connection (not pictured). It also has a light with a light switch (not pictured). The booth is movable by both forklift and crane.
-
Frisking BoothsLWB Booth
The Lead Wool Blanket Frisking Booth offers the conveniences of portability and adaptability. Shielding attenuation can be regulated by the installation of standard 1′ x 4′ Lead Wool Blankets in the areas of interest. The booth frame can be easily handled when no lead wool blankets are installed. The booth sections are of welded construction. The sections are bolted together to form the booth. The structural steel frame is epoxy coated or powder coated. Blanket support rods, spaced every 4”, are located at two levels to support the blankets. The blanket walls can be 1 to 4 layers thick. Blankets can be laid on the top frame section to create a shielded ceiling. The standard booth measures 36″ wide x 48″ deep x 96″ high and can be disassembled for storage.
-
1600-Series SystemsPFB-1600 Filtration Unit
The PFB-1600 HEPA filtration unit delivers high power and incorporates a bag-in/bag-out (BIBO) style filter housing. For applications requiring maximum containment integrity during filter replacement, this filtration unit is the first choice. The PFB-1600 develops over 9″ of static pressure. This high performance unit overcomes flow losses incurred by extended lengths of flex duct and filter loading. It is ideal for remote placement and sustained operation.
This unit has been evaluated to the applicable CSA standards for use in the United States under product Class 3812-81 (Fans and Blowers) and Canada under product Class 3812-01 (Fans and Blowers).
Dimensions: 93″ L x 32″ W x 45″ H. Weight: approx. 680lbs. -
1600-Series SystemsPFB-1600VFD Filtration Unit
The PFB-1600VFD HEPA filtration unit delivers high power and incorporates a bag-in/bag-out (BIBO) style filter housing. With the variable speed model, the user may control the blower speed from 20% to 100% of the base speed. For applications requiring maximum containment integrity during filter replacement, this filtration unit is the first choice. The PFB-1600VFD develops over 9″ of static pressure. This high performance unit overcomes flow losses incurred by extended lengths of flex duct and filter loading. It is ideal for remote placement and sustained operation.
This unit has been evaluated to the applicable CSA standards for use in the United States under product Class 3812-81 (US – Fans and Blowers). Please call for information on VFD units that are CSA approved for use in Canada.
Dimensions: 93″ L x 32″ W x 45″ H. Weight: approx. 700lbs. -
ContainmentGloved Enclosures
These gloved enclosures are installed in a two room Perma-Con®. They both extend from one room to the other. Drum ports are incorporated in the end and the bottom of this hood system. These hoods have fluorescent lights mounted outside of the hood, pass boxes, large hinged doors and a track mounted tray for movement of material from one end to the other.
