Shop
Showing 1–9 of 176 results
-
Perma-Con®Perma-Con® Door Filter
P/N AK24 Multimedia air filter for standard Perma-Con® door measures 11″ x 13″ x 1″. May be used with or without door HEPA filter.
-
Perma-Con®Weather-Con™
What is Weather-Con™?
FEATURES
- EXTERNAL: Suitable for outside conditions
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
- LIMITATIONS:
- WASHABLE: Weather-Con™ does not offer inside stainless steel washable walls
-
Perma-Con®Perma-Con® EXT
What is Perma-Con® EXT?
FEATURES
- EXTERNAL: Suitable for outside conditions
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- WASHABLE: Stainless steel interior surfaces allow for easy removal of contaminants
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
-
Perma-Con®“Classic” Perma-Con®
What is Perma-Con®?
FEATURES
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- WASHABLE: Stainless steel interior surfaces allow for easy removal of contaminants
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
- LIMITATIONS:
- INSIDE USE: Perma-Con® is not suitable for outside conditions
- INSULATION: Not a standard option, after-market insulation options are available
-
Inline Carbon Steel Pre-filter HousingsCarbon Steel Pre-filter Housings
Inline, powder coated, carbon steel pre-filter housings accept up to four 24″ x 24″ x 2″ pre-filter elements in any combination. RPS recommends the following pre-filters: AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, and AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 28″ L x 26-1/2″ W x 22-1/2″ H. Custom sizes and configurations are available.
Nominal dimensions are 28″ L x 26-1/2″ W x 22-1/2″ H. -
Inline Stainless Steel Pre-filter HousingsStainless Steel Pre-Filter Housings
Units are comprised of stainless steel inlet and outlet plenums. Please see element options below. Custom sizes and configurations are available.
Custom sizes and configurations are available. -
Inline Mist-eliminating Stainless Steel Pre-filter HousingsMist Eliminating Stainless Steel Pre-Filter Housings
The BF18 series of inline mist-eliminating stainless steel housings is designed to hold one 24″ x 24″ x 2” stainless steel demister element (AK5216), sold separately. Unit has a bottom-mounted valve with ¼” NPT fitting to drain off collected moisture. Can accommodate up to 2500 CFM flow. Unit will optionally hold any framed 24″ x 24″ x 2” filter element such as the AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, or AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 27″ L x 25″ W x 27-1/2″ H. Custom sizes and configurations are available.
Nominal dimensions are 27″ L x 25″ W x 27-1/2″ H. -
ShieldingCounting Cave (Shielding)
The epoxy coated, seal welded shielded cave surrounds the frisker probe to shield background radiation for on-site use. The cave has an opening 4” wide x 6 ½” high x 11” deep and 2” steel shielding on five sides. It has an angular hole in the back face of cave for the probe wire and threaded holes with removable lifting eyes for cave handling. Available with a shielded door.
The shielded cave may also be mounted on a heavy duty epoxy coated, welded structural steel mobile cart on four casters (two rigid, two swivel locking) that is easily relocated to the work site. The top of the cart supports the cave with space for the monitor and information recording. It also has two lower shelves for storage.
The probe holders are stainless steel and maintain uniform distance from probe to sample.
Currently available for:
- Ludlum Model 43-93
- Ludlum Model 43-5
- Ludlum Model 44-9
- Holders for other models available upon request
The cave has an opening 4” wide x 6 ½” high x 11” deep and 2” steel shielding on five sides. -
VentilationFilter Bags
Replacement bags are non-sticking and constructed of 8-mil thick polyvinyl chloride with a yellow translucent matte finish. A ¼-inch diameter elastic shock cord is hemmed into the opening of the bag so that when stretched around the bagging flange, the bag fits securely. The bag contains (3) glove ports to facilitate easier handling of filtration during change and provides a convenient used-bag removal receptacle. Containment bags are suitable for continuous operating temperatures to 150° F (66° C).
Minimum order is Qty. 4. Delivery is 2-3 weeks ARO or less.
Replacement bags are non-sticking and constructed of 8-mil thick polyvinyl chloride.