Demister Housing with Demister Element

The demister housing is comprised of three separate components: 1) lower housing, 2) demister-element clamping frame (which locks the element against a welded shelf inside the lower housing), and 3) upper housing.
Upper and lower housings are joined with bolting flanges.
Both ends of the assembled housing are flanged (see Figure 1) to standard ANSI sizes for field-bolting into the gas-stream.
All components are fabricated from Type-304 stainless steel with a #4 finish on all exterior surfaces. Other construction alloys are available upon request.
Demister housing can be oriented horizontally or vertically as depicted in Figure 2 below.
Dimensional specifications of the RPS demister housing/element can be sized to accommodate the requirements of any gas-flow system.